Makita Review UK 2026

Key specifications

Cut Quality and Capacity

With a 165mm plunge-cut blade, the plunge saw/1 (RH62) is made for plunge-start work on boards and sheet materials, where 165mm is the practical limit for plunge depth and reach. Cut quality depends on setup, because a steady guide and correct blade alignment help keep edges cleaner. Capacity is defined by what the 165mm blade can reach, so thicker stock needs careful preparation or multiple passes. Straight cuts are best on properly supported workpieces, as unsupported sections are more likely to vibrate and affect the surface finish along the line.

Power: Cordless or Corded

The Makita/1 (RH62) is a corded plunge cut saw, so it runs on mains power rather than a battery. That supports longer sessions because cutting is not restricted by battery charge, while keeping power delivery consistent during plunge-cut work. The main trade-off is the need for a nearby power outlet, with the mains lead potentially interfering when positioning awkward workpieces. Planning the workspace and managing cable routing becomes part of setup, and the saw requires careful handling to avoid pulling on the lead. With a 165mm blade and a plunge-cut design that uses a guide rail, the saw suits projects where stable mains power matters more than portability.

Rail System and Compatibility

On a rail-based plunge cut system, the saw's plunge action is meant to work in step with a guide so the cut line stays controlled, especially when long, straight sections need to start cleanly and at a set position. For the plunge saw/1 (RH62), rail compatibility depends on whether the matching guide track and clamps are available for the same 110V, 165mm plunge-cut format. An accurate rail alignment helps reduce wandering, but rail fit still matters, because any play between components can affect straightness.

Build, Dust Extraction and Handling

Guide setup influences more than straightness, because the plunge saw's build affects how comfortably it can be controlled during guided starts and follow-through. The Makita SP6000J/1 is a corded 110V 165mm plunge-cut tool with a fixed base travel that supports steady plunges along marked lines. Dust handling depends on where the cut waste exits, and effective extraction relies on keeping a hose close to the blade path. Control also depends on weight distribution, so the workpiece should be supported and the cable managed to avoid snagging. Clamp placement helps reduce vibration, although fine dust may still escape.

Who Is This Plunge Saw For?

Who this plunge cut saw is for depends on how it will be used in real work. A corded 110V 165mm plunge-saw style tool is best suited to tasks where consistent mains power and repeatable plunge cuts matter more than battery portability. It suits joiners, flooring fitters, and cabinet makers cutting the same profiles day after day, especially in workshops that already run 110V corded tools. It is less convenient for users who need flexible setups away from power outlets, since the cord limits working range. This tool is a strong fit when plunge accuracy and controlled, rail-guided cutting are central to the job.

Where to Buy in the UK

Finding the Makita/1 (RH62) in the UK is usually easiest when buyers focus on retailers that stock The plunge saw corded tools and list the model by name. They can check large trade suppliers and smaller tool shops, then confirm the SKU matches SP6000J/1. Online listings should be read carefully because accessories and cases may be shown separately. Before ordering, buyers should compare delivery options and returns, and confirm availability in the correct voltage. If stock is limited, authorised The Makita dealers can help locate it.